Dosing Pump
Specification
Application
This dosing pump is suitable for indoor or outdoor pool, can automatic control the dosing dose of dosing pump according to PH or ORP of monitoring instrument.
The dosing of the medicament is mainly completed by the use of special medicament dosing equipment. The dosing equipment adds the medicament according to the calculated dosage to the water distribution pipeline of the circulating water treatment of the swimming pool, and the medicament is diluted through the water distribution pipe and uniformly distributed. Throw it all over the swimming pool.
The dosing pump is generally used in conjunction with chlorine tablets, enzyme clarifiers, environmentally friendly algaecides, PH increase agents, PH decrease agents and other agents.
The dosing pump also puts the agent on the water distribution pipeline of the swimming pool circulating water treatment system. The special injection joint is installed on the circulating water pipeline. The injection joint is equipped with a one-way valve so that the pipeline will not leak when the dosing system is repaired. The medicine injection connector and the medicine pump are connected by a medicine hose.
The dosing pump can be installed on a wall or shelf about 1.5 meters above the ground for easy operation. Place a medicine bucket near the dosing pump. Since the medicine barrel is not easy to seal, and part of the liquid medicine volatilizes irritating or corrosive gas, it is best to set up an independent medicine injection room to separate from other equipment in the machine room, and install forced ventilation equipment in the medicine room.
The dosing pump can only dosing liquid medicaments, if the medicament is solid or powder, it needs to be configured in advance to a solution of the required concentration. It is mainly suitable for large and medium-sized pools, and it is best to set up an independent dosing room.
